Log File - 2N VoiceBlue Next User Manual

remark].wav". You can upload more than one message in *.tar file.
Note

LOG file

The LOG file window helps read out the gateway LOG file. The bottom part of the
window includes icons for saving the LOG file into a file and refreshing the LOG listing
in the web window.
Refer to
CDR File
The CDR file window helps read out the Call Data Records (CDR) of the gateway. The
bottom part of the window includes icons for saving the CDR into a file and refreshing
the CDR listing in the web window. Refer to Subs. CDR line description for more details
on the CDR format.
Caution
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Voice messages with indexes 30–37 are used for detection of the mobile
provider's voice message played before call connection. If a match is
found of the voice message with any of the voice messages recorded in
the gateway, the call is terminated automatically or established via the
last GSM outgoing group set in the LCR table (on condition that the ITD –
Ignore tone detection in last group parameter is active) in the Gateway
Configuration /
Configuration /
settings for details.
Subs. 4.3 for more details.
The maximum capacity is 100,000 call records. When this limit is reached,
the oldest record(s) will be deleted automatically!
The latest 1,000 call records are displayed in the web interface.
Downloading of a high amount of CDR may take up to several tens of
seconds.
LCR table section.
GSM basic parameters
Refer to the Gateway
/ Voice message detector
43