Lennox Hearth Products EBVI25 Homeowner's Care And Operation Instructions Manual page 9

Elite series b-vent gas fireplace heater inserts
Hide thumbs Also See for EBVI25:
Table of Contents

Advertisement

1. Place the rear log onto the two corresponding locating pins at the
back of the fi rebox as shown in Figure 16.
Figure 16
Rear Log
2. Place the Front Right Log onto the two corresponding locating pins
as shown in Figure 17.
Figure 17
3. Place the Center Log onto the two corresponding locating pins as
shown in Figure 18.
Figure 18
Center Log
Front Right Log
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
4. Place the Front Left Log onto the two corresponding locating pins
as shown in Figure 19.
Front Left Log
Figure 19
5. Install the Top Left Log onto the corresponding locating pin and
indentation on Center Log as shown in Figure 20.
Figure 20
Top Left Log
6. Install the Front Center Log over the Front Right Log. The front
of log will rest on the burner and the back of log will rest on rear
log as shown in Figure 21.
Figure 21
7. Install the Top Right Log into the corresponding indentations on
Front Center Log and front right twig as shown in Figure 22.
Front Center Log
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ebvi30

Table of Contents