Regular Startup; Turning Off The Display - Pioneer AVH-X8600BT Operation Manual

Basic operation
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The "Select Program Language" screen ap-
pears.
2 Touch the language that you want to
use on screen.
3 Touch the following key.
Displays the "Smartphone Setup"
screen.
4 Touch the item you want to set.
= For details, refer to Information on the con-
nections and functions for each device on
page 38.
5 Touch the following key.
Displays the Top menu screen.
# If you touch , the display returns to the pre-
vious screen.

Regular startup

% Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p The screen shown will differ depending on
the previous conditions.
p If the anti-theft function is activated, you
must enter your password.

Turning off the display

You can turn off the display at night or when
the screen is too bright.
% Press and hold the MODE button.
The display turns off.
p If you touch the screen when the display is
off, it reverts to the original screen.
Chapter
02
17
Engb