Pioneer AVH-X8600BT Operation Manual page 135

Appendix
Message
Incompatible SD
Check USB
Video resolution not sup-
ported
USB1 was disconnected for
device protection. Do not re-
insert this USB memory into
the unit. Press reset to restart
USB memory.
USB2 was disconnected for
device protection. Do not re-
insert this USB memory into
the unit. Press reset to restart
USB memory.
Audio Format not supported
iPod
Message
Error-02-6X/-9X/-DX
Error-02-67
iTunes tagging
Message
Error-8D
Tag store failed.
Already stored.
Memory full. Connect iPod.
Memory full. Tags not stored.
Connect iPod.
Cause
The SD memory card is not sup-
ported by this product.
The USB connector or USB cable is
short-circuited.
The connected USB storage device
consumes more than maximum al-
lowable current.
Files that cannot be played on this
product are included in the file.
The USB connector or USB cable is
short-circuited.
The connected USB storage device
consumes more than maximum al-
lowable current.
The USB interface cable for iPod /
iPhone is short-circuited.
This type of file is not supported on
this product.
Cause
iPod failure.
The iPod firmware version is old.
Cause
Built-in FLASH ROM encountered
an error.
Tag information cannot be stored in
this product.
This tag information is already
stored in memory.
The tag information is successfully
stored. The flash memory of this
product has become full.
This product's flash memory used
as the temporary storage area is
full.
Action (Reference)
! Remove your device and replace it with a
compatible SD memory card.
! Format the SD memory card. It is recom-
mended that you use SD Formatter for for-
matting SD memory cards. (Page 139)
Check that the USB connector or USB cable
is not caught in something or damaged.
Disconnect the USB storage device and do
not use it. Turn the ignition switch to OFF,
then to ACC or ON and then connect a com-
pliant USB storage device.
Select a file that can be played. (Page 142,
Page 151)
Check that the USB connector or USB cable
is not caught in something or damaged.
Disconnect the USB storage device and do
not use it. Turn the ignition switch to OFF,
then to ACC or ON and then connect a com-
pliant USB storage device.
Confirm that the USB interface cable for iPod
/ iPhone or USB cable is not caught in some-
thing or damaged.
Select a file that can be played. (Page 142,
Page 151)
Action
Disconnect the cable from the iPod. Once the
iPod's main menu is displayed, reconnect the
iPod and reset it.
Update the iPod version.
Action
Turn the ignition switch to OFF and then to
ON.
Try again.
Tag information can only be saved once for
any given song. Tag information cannot be
saved for the same song more than once.
The tag information on this product is trans-
ferred to the iPod automatically when an iPod
is connected.
The tag information on this product is trans-
ferred to the iPod automatically when an iPod
is connected.
Appendix
135
Engb