In Case Of Trouble; Visit Our Website; About This Product; Protecting The Lcd Panel And Screen - Pioneer AVH-X8600BT Operation Manual

Precaution

In case of trouble

Should this product fail to operate properly,
contact your dealer or nearest authorised
Pioneer Service Station.

Visit our website

Visit us at the following site:
http://www.pioneer.eu
! Register your product. We will keep the de-
tails of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
! We offer the latest information about
PIONEER CORPORATION on our website.
! Pioneer regularly provides software up-
dates to further improve it's products.
Please check the support section of the
Pioneer website for all available software
updates.

About this product

! This product does not work correctly in
areas other than Europe. The RDS (Radio
Data System) function operates only in
areas with FM stations broadcasting RDS
signals. The RDS-TMC service can also be
used in the area where there is a station
that broadcasts the RDS-TMC signal.
! The Pioneer CarStereo-Pass is for use only
in Germany.
Protecting the LCD panel
and screen
p Do not expose the LCD screen to direct
sunlight when this product is not used.
This may result in LCD screen malfunction
due to the resulting high temperatures.
p When using a mobile phone, keep the aer-
ial of the mobile phone away from the LCD
screen to prevent disruption of the video in
the form of spots, coloured stripes, etc.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys only
with your finger and do so gently.

Notes on internal memory

Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
p Some of the settings and recorded con-
tents will not be reset.

Data subject to erasure

The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p Some of the settings and recorded con-
tents will not be reset.

Resetting the microprocessor

CAUTION
Pressing the RESET button resets settings and re-
corded contents to the factory settings.
p Do not perform this operation when a device
is connected to this product.
p Some of the settings and recorded contents
will not be reset.
The microprocessor must be reset under the
following conditions:
! Prior to using this product for the first time
after installation.
! If this product fails to operate properly.
! If there appears to be problems with the op-
eration of the system.
! If your vehicle position is shown on the
map with a significant positioning error.
1 Turn the ignition switch OFF.
Chapter
01
11
Engb