9. Checking the resolution change IC movement
Is there +3.3V supply on U3 pins 65, 76, 86, 121, 143, 157, 167, 198, 193, 183, 179, 175, 188.
Is there +2.5V supply on U3 pins 5, 7, 10, 11, 12, 15, 18, 21, 22, 25, 28, 31, 35, 36, 42, 63, 76,
88, 119, 141, 159, 162, 163, 166, 169, 170, 189, 190, 196.
OK
Is 14.318MHz clock input to U3 pin 3, 4 at
TTL level.?
NG
OK
Proceed section 11 "Checking the
operation of CPU"
NG
Is 14.318MHz clock output from Y1 at TTL
level.?
OK
Failure point
Y1 failure
Proceed section 11 "Checking the
operation of CPU"
6-14
Need help?
Do you have a question about the MultiSync LCD1550V and is the answer not in the manual?