Alarm Information Of Event - HIKVISION iVMS-5200 User Manual

6.1 Alarm Information of Event

Purpose:
The event information of the connected device displays, such as motion detection, video loss, video
tampering, etc.
Steps:
1. Open the Alarm Center page and the alarm that received by the Control Client displays on the
alarm list.
Alarm Time: The start time of the alarm.
Alarm Name: The name of the alarm.
Alarm Content: The content of the alarm. For manual alarm, the content includes the name of
the user who sent the alarm and the alarm type; for VCA alarm, the content includes the device
information, the alarm triggered device and the rule name; for other alarm, the content includes
the device information and the alarm triggered device.
Alarm Status: The status of the alarm, including Start, Unconfirmed; Start, Confirmed; Stop,
Unconfirmed; Stop, Confirmed. Start means the alarm has not stopped yet and Confirmed means
the alarm has been acknowledged by the user.
Alarm Level: The level including low, medium and high which indicates the urgent degree of the
alarm.
Handle Alarm: You can check the device information and the alarm type. You can also view the
live view of the alarm triggered camera, start two-way audio with the alarm triggered camera
which is configured the two-way audio as the linkage action, and view the picture of the alarm
which has configured with alarm picture. For detailed configuration, please refer to User Manual
of iVMS-5200 Professional Web Manager.
Acknowledgement Information: Display the acknowledgment information of the alarm.
2. Click to select the alarm and click Acknowledge in the toolbar to confirm the alarm, or click
Describe and Acknowledge to edit the description and confirm the alarm.
3. To delete the alarm, click to select the alarm and click Delete in the toolbar, or right-click the
alarm and click Clear. Or you can click
4. For arming control, click Arming Control to activate the Arming Control window. You can click
Disarm / Disarm All to disable the event detection and set the disarming duration. You can also
click Arm / Arm All to enable the event detection.
User Manual of iVMS-5200 Control Client
to delete all the alarms.
44