Lexmark Optra SC 1275 Service Manual page 58

Attendance Message
Change <tray>
<Custom Type Name>
<size>
<type><size>
Action
The media in the tray is a different
size from the media detected by the
paper size sensor, or it is different
from the size that was set in the
Paper Size or Paper Type menu
items. The display shows the follow-
ing information:
On line 1, <tray> indicates where
the printer expects the printed mate-
rial to be.
On line 2, one of the following items
is displayed:
<Custom Type Name>
Custom Type 1 through 3 is a user-
defined name that was created with
the MarkVision utility. The name is
truncated to 16 characters.
<size>
If the requested type matches the
type currently in the tray, the paper
size is displayed if you have not
defined a custom type name. The
name is truncated to 16 characters.
<type><size>
The requested <type> is other than
a custom type. The type name is
truncated to 9 characters.
The requested <size> of paper is
displayed. The size name is trun-
cated to 6 characters.
• Load the requested size and type
in the source.
• If the source has auto-size sens-
ing (tray 1 or tray 2), the printer
automatically clears the message
and continues processing the job.
If the source does not have auto-
size sensing, press Go after load-
ing the requested size.
Or, to reset the printer:
• Press <Menu> to access the
Busy menu.
• Select Reset Printer.
Diagnostic Information 2-23