Lexmark Optra SC 1275 Service Manual page 43

Status Message
Programming Disk
DO NOT POWER OFF
Menus Disabled
Activating Menu Changes
2-8
Action
The disk is being programmed.
Fonts or macros are being written to
disk.
No button actions are possible while
this message is displayed.
If information is written both to flash
memory and to disk at the same
time, the Programming Flash mes-
sage is displayed.
The printer menus have been dis-
abled. This occurs when <Menu> is
pressed while the printer is Ready
and Menu Lockout is active.
The printer display shows this mes-
sage for one second and then
returns to the Ready message.
No button actions are possible while
this message is displayed.
If the operator has disabled the
menu and you want to run print tests,
turn the machine off, then press Go
and Stop as you turn the machine
on.
The printer is reset to activate a
printer setting changed in the
menus.
No button actions are possible while
this message is displayed.