Lexmark Optra SC 1275 Service Manual page 48

Attendance Message
35 Res Save Off Deficient Mem-
ory
38 Memory Full
Action
The printer lacks the memory
needed to enable Resource Save.
This message usually indicates that
too much memory is allocated for
one or more of the printer link buff-
ers.
• To enable Resource Save after
this message is displayed, either
install additional memory or set
each link buffer to the Auto value.
• After you set all link buffers to
Auto, exit the printer menus to
activate link buffer changes.
• When Ready is displayed, enable
Resource Save in the Setup
Menu and modify the link buffers
again.
• Press Go to clear the message.
The printer automatically disables
Resource Save and continues.
The printer is processing data, but
the memory used to store pages is
full.
Reduce the complexity of the page.
• Simplify the print job by reducing
the amount of text or graphics on
a page.
• Delete unnecessary downloaded
fonts or macros.
• Install additional memory.
• Reduce the print resolution.
Send the job to print again.
Press Go to clear the message. The
printer continues printing the job;
however, some data may not print or
may not print correctly.
Or, to reset the printer:
• Press <Menu> to access the
Busy menu.
• Select Reset Printer.
Diagnostic Information 2-13