Table of Contents
Advertisement
CheCk the filters
•
Alternatively, spread some newspaper on the floor.
•
While emptying the bin, check the filters – blocked filters quickly reduce suction.
•
Press the latch and the bottom of the dustbin will drop open dumping the contents into the rubbish
•
You can see the mesh filter through the side of the bin. You should be able to see
bin, or onto the newspaper.
the HEPA filter through the mesh filter.
•
Do not tap the open dustbin on the sides of your rubbish bin as this could result in damage to the
dustbin.
•
If either filter looks clogged or dirty or if you cannot see the HEPA filter clearly, it is
•
Turn the agitator on top of the bin back and forth several times to agitate the inside of the HEPA filter.
time to clean both filters.
This releases excess any dust that might be held in its folds.
•
If they do not need cleaning, refit the bin in the cleaner – put the bottom in first,
•
Lift the bottom of the bin up to close it.
then gently push the top down into position. You will hear the locks click into place.
CHECK THE FILTERS
•
Check that it is secure.
•
While emptying the bin, check the filters – blocked filters quickly reduce suction.
•
You can see the mesh filter through the side of the bin. You should be able to see the HEPA filter
Cleaning the vaCuum Cleaner
through the mesh filter.
•
Before cleaning, switch the power off and remove the plug from the wall power outlet.
•
If either filter looks clogged or dirty or if you cannot see the HEPA filter clearly, it is time to clean
both filters.
•
Do not put any part of the cleaner in a dishwasher.
•
If they do not need cleaning, refit the bin in the cleaner – put the bottom in first, then gently push
•
Do not use harsh or abrasive cleaning agents or solvents.
the top down into position. You will hear the locks click into place.
•
Wipe external surfaces with a damp cloth. A dab of washing-up liquid will remove
•
Check that it is secure.
stubborn stains.
CLEANING THE VACUUM CLEANER
•
Wipe the tools with a damp cloth or hand wash in warm soapy water. Rinse under
•
Before cleaning, switch the power off and remove the plug from the wall power outlet.
a running tap to remove all traces of soap, then let air dry – do NOT refit until they
•
Do not put any part of the cleaner in a dishwasher.
are completely dry.
•
Do not use harsh or abrasive cleaning agents or solvents.
•
Wipe the extendable tube and hose with a damp cloth. Check they are dry before
•
Wipe external surfaces with a damp cloth. A dab of washing-up liquid will remove stubborn stains.
refitting. Do not put them in water, you will damage them.
•
Wipe the tools with a damp cloth or hand wash in warm soapy water. Rinse under a running tap
to remove all traces of soap, then let air dry – do NOT refit until they are completely dry.
•
Wash the dust bin in warm soapy water with a soft cloth or sponge (remove all
•
Wipe the extendable tube and hose with a damp cloth. Check they are dry before refitting. Do not
filters first). Rinse to remove all traces of soap, then let it air dry – do NOT refit until
put them in water, you will damage them.
it is completely dry.
•
Wash the dust bin in warm soapy water with a soft cloth or sponge (remove all filters first). Rinse
to remove all traces of soap, then let it air dry – do NOT refit until it is completely dry.
Cleaning the filters
CLEANING THE FILTERS
While emptying the dust bin, check the filters – blocked filters quickly reduce suction.
While emptying the dust bin, check the filters – blocked filters quickly reduce suction.
Make sure the space you are using is protected with an old towel or some newspaper
Make sure the space you are using is protected with an old towel or some newspaper
as this process can be messy.
as this process can be messy.
•
Grip the bin lid with one hand, grip the bin with the other, and turn the lid of the bin
•
Grip the bin lid with one hand, grip the bin with the other, and turn the lid of the bin to move
to move the | mark on the lid from the
|
the
mark on the lid from the
•
Lift the lid and filter assembly out of the bin and turn them upside down.
•
Lift the lid and filter assembly out of the bin and turn them upside down.
•
Turn the filter assembly clockwise to unlock it and lift it off to expose the HEPA filter.
•
Turn the filter assembly clockwise to unlock it
•
Lift the HEPA filter up and out of the lid.
mark
around to the
around to the
.
filter
assembly
mesh filter
8
.
HEPA
filter
Advertisement
Table of Contents
