Yamaha TMax XP500 Owner's Manual page 33

Ofrecido por www.electromanuales.com
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to "#".
3. Turn the key to "ON".
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?
With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?
With the engine still running:
9. Move the sidestand down.
Does the engine stall?
The system is OK. The scooter can be ridden.
INSTRUMENT AND CONTROL FUNCTIONS
NO YES
YES NO
YES NO
3-16
NOTE:
This check is most reliable if performed with
a warmed-up engine.
The sidestand switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
The brake switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
3