Instrument Panel; Cruise Control - Ford C-Max Hybrid 2013 Quick Reference Manual

instrument
panel

1 cruiSe conTrol

To set a cruise control speed:
1. Press the on button and release.
2. Accelerate to the desired speed.
3. Press the SeT + and release, then
take your foot off the accelerator.
After your speed has been set, you can press
SeT + or SeT - to adjust cruise speed. To
disable, press the oFF button, tap the brake
pedal or pull the can control toward you.
eco cruise control
*
Saves vehicle energy by slowing down acceleration
compared to standard cruise control. Your vehicle
may lose speed temporarily when going uphill.
This feature can be controlled through the
information display.
2 leFT Vehicle inFo diSPlaY
*
Provides specific information about various systems
on your vehicle. Use the left-hand, 5-way controls
to use SmartGauge , customize views, and choose
®
and confirm settings and messages. Refer to the
Information Displays chapter of your Owner's
Manual for more information.
4
2
3
2
1
4
5
if equipped
*
7
3
6
3 righT Vehicle
inFo diSPlaY
*
Access information about
Entertainment, Phone,
Climate, Navigation or the
*
animated EcoGuide by using
the right-hand, 5-way controls.
Scroll through the menu,
highlight selections and make
adjustments. Press oK to
confirm your choices.
4 STeering Wheel
8
media conTrolS
*
(Volume): Press to increase
(+) or decrease (-) volume levels.
Press to access the next/
previous radio station, CD track
or preset satellite radio channel .
*
Pull to access voice recognition.
Press to access phone mode
or to answer a call.
Press to end a phone call.
oK: Press to confirm your
selection.
5 TilT/TeleScoPe
STeering column
*
Unlock the steering wheel by
pulling the lever down. Adjust the
steering wheel to your desired
position. Push the lever up to lock
the steering wheel in place.
6 PuSh BuTTon
SilenT STarT
*
Allows you to go into "Ready
to Drive" mode by pressing the
PoWer STarT/SToP button
while fully pressing down on the
brake pedal. A green "Ready
to Drive" indicator light will
appear in the instrument cluster
after you start the vehicle. This
lets you know that the vehicle is
turned on and ready for driving.
Press the PoWer STarT/
SToP button again to turn the
vehicle off.
Note: Your intelligent access
key must be inside the vehicle to
put the vehicle in accessory
mode or "Ready to Drive".
7 hazard conTrol
8 door locK
indicaTor lighT
Illuminates when all of the doors
are locked, and will not light
when a door remains open or
unlocked. The central door locks
can be found on both driver and
front-passenger doors, or on a
keyless remote .
*
if equipped 5
*