Adding A Type(S) To An Existing Project - TDS SuperEASY User Manual

Pocket SuperEASY™
Site Index by Species Miscellaneous
Once all the Master Screen tabs have been filled in with the necessary
values you can either tap Save to save the information and return to the
Project Screen, tap Plots to save the entries and go directly to the Plot
Screen or tap Return to leave the screen without saving any of the
entries.

Adding a Type(s) to an Existing Project

To create a new project type tap on Master at the bottom of the Project
screen. Then tap New from the menu. This will open the Master screen.
The name of the project should appear in the Project cell. At a minimum,
the Township, Range, Section and Type number should be entered. The
type number will differentiate this type from other project types. A
completed Master Screen example is shown below.
Master Screen
Once all the Master Screen tabs have been filled in with the necessary
values you can either tap Save to save the information and return to the
Project Screen, tap Plots to save the entries and go directly to the Plot
Screen or tap Return to leave the screen without saving any of the
entries.
Atterbury Consultants, Inc. 6