Start Pocket Supereasy - TDS SuperEASY User Manual

Pocket SuperEASY™

Start Pocket SuperEASY™

To start Pocket SuperEASY™, tap Start at the top of the screen, then
Programs near the bottom of the list, then tap on the PocketEASY™
icon. Pocket SuperEASY™ is referred to as PocketEASY™ in the
software application.
The following screen will open. This is the Project screen where you
enter a new cruise project or open an existing cruise project If there are
no projects the screen will be blank. Existing projects are listed by their
project name with the associated cruise type or types listed as subfiles
below each project. To hide the associated cruise type(s), click on the
minus (-) sign to the left of the Project name. This will hide the timber
type(s) and the minus (-) sign will change to a plus (+) sign. To unhide
the timber type(s), click on the plus (+) sign. Note: Users of handhelds
with .NET CE V4.2 will see the menus on the top rather than the
bottom.
Project Screen
Project
Cruise Types
Atterbury Consultants, Inc. 3