Entering Plot Data - TDS SuperEASY User Manual

Pocket SuperEASY™

Entering Plot Data

It is normal to tap on Plots to go to the Plots screen where you begin
entering data for a cruise plot. The Plot Screen is shown below.
Plot Screen
In the Plot Screen you enter the plot number, a required entry, and have
the option of entering plot coordinates, elevation, slope and aspect.
Slope and aspect values are defined in the Slope and Aspect tables
which are discussed in the tables section of this manual.
After the plot number is entered, tap on the CRU (Cruise Screen)
selection at the bottom of the screen to enter tree data for the plot. The
following screen will open.
Cruise Screen
The Cruise Screen is designed to match the Tree Input screen in
SuperACE™. The following are descriptions of the fields.
T# - Tree Number. A three digit numeric field. Tree number is assigned
by the computer. Users can also input tree numbers when required by
the cruise, such as, measuring permanent plots with tagged pre-
numbered trees.
Atterbury Consultants, Inc. 12