Table of Contents
Advertisement
Pocket SuperEASY™
P - Numeric field left blank when using length or diameter deductions. A
"1" is entered when percentage deductions for board foot and cubic feet
are to be used. Percentages are entered as whole numbers (i.e. 5%
board foot deduction would be entered with 0 under the first F field and 5
under the first I field with 1 entered under the P field).
Below are examples of plot data entries in the Cruise Screen, scrolling
from left to right in the screen.
Segment volumes can be calculated by selecting a tree record, then
tapping on the Vol selection at the bottom of the Cruise Screen. The
following screen will open, calculating scribner and cubic volume for the
tree segments. It also calculates segment diameters, total tree volume,
trees per acre and basal area. This screen is helpful in determining the
correct diameter and volume values for sort and grade requirements
along with split scaling occurrences.
Log Calculation Screen
Atterbury Consultants, Inc.
15
Advertisement
Table of Contents
