Yamaha F80B Service Manual page 122

POWR
6. Connect the fuel hose and shift position
switch coupler.
7. Connect the PTT motor leads and PTT
switch coupler, and then install the junc-
tion box cover.
PTT motor lead bolt:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
8. Connect the battery leads.
Positive battery lead nut:
9 N·m (0.9 kgf·m, 6.6 ft·lb)
9. Connect the shift cable and throttle
cable, and then adjust their lengths.
For adjustment procedures, see Chapter
3, "Adjusting the throttle link and throttle
cable" and "Checking the gear shift oper-
ation."
10. Install all parts removed during disas-
sembly.
11. Check the engine oil level.
a
b
NOTE:
If the engine oil is below the minimum level
mark b, add sufficient oil until the level is
between a and b.
Recommended engine oil:
4-stroke motor oil
API: SE, SF, SG, SH, or SJ
SAE: 10W-30 or 10W-40
5-53
Power unit
S60C1150
6D93G11