Removing The Water Pump And Shift Rod; Disassembling The Oil Seal Housing; Checking The Water Pump And Shift Rod - Yamaha F80B Service Manual

LOWR
Removing the water pump and shift
rod
1. Remove the water pump housing and
impeller.
2. Remove the Woodruff key.
3. Remove the outer plate cartridge and oil
seal housing.
4. Remove the shift rod assembly 1.
1
b
2
a
NOTE:
Pull up the shift rod assembly a little a to dis-
connect it from the shift slider 2, turn it clock-
wise 90° b, and then remove it.

Disassembling the oil seal housing

1. Remove the oil seals using a flat head
screw driver.
6-9
Lower unit
S60C6405
Checking the water pump and shift
rod
1. Check the water pump housing for defor-
mation. Replace if necessary.
2. Check the impeller and insert cartridge
for cracks or wear. Replace if necessary.
3. Check the Woodruff key 1 and the
groove a on the drive shaft for wear.
Replace if necessary.
a
4. Check the shift rod for cracks or wear.
Replace if necessary.
1
S6D86050
6D93G11