Running A Control Solution Test - EPS Bio Technology EasyPlus mini R13N User Manual

Running A Control Solution Test

You need the meter, a test strip, and control solution
1. Put a test strip into the meter in
the direction of the arrow and the
icon of shows itself.
1. If display stays at
in
2. If you do not choose "CtL", the test results will be included in the memory of blood
test.
2. Press
"CtL " and press
confirm the setting.
or
.
or
twice to set
to
and no any setting is made, the test results will always
3. Place the meter on a flat surface,
like a table.
4. Remove the control solution bottle
cap and wipe the tip of the bottle
with a tissue.
17