Table of Contents
Advertisement
2. Remove the check mark from the Use Automatic Settings box.
Note: In some cases Windows will give an error message to the effect
that "Windows cannot modify this resource" at this point. If you are
unable to access the settings for changing system resources, reboot the
system in Safe Mode to make changes to resource settings. (To enter
Safe Mode, press the F8 key while the system is rebooting.)
3. Double-click on the words Input/Output Range.The following
screen will appear:
Advertisement
Table of Contents
Need help?
Do you have a question about the Parallel-PCI/LP Card and is the answer not in the manual?