Table of Contents
Advertisement
1. Before opening the casing of your computer, make sure that all
power is off.
2. Locate an unused PCI slot and insert the Parallel-PCI/LP card into it.
Ensure that the card is well seated.
3. Screw the metal bracket of the Parallel-PCI/LP card to your PC's
casing and replace the machine's cover.
4. Connect your parallel (printer) cable to the port on the Parallel-
PCI/LP card and turn the PC on.
5. When Windows starts, it will find a Parallel-PCI/LP Controller and will
ask you for a driver for this device. When prompted, insert the
installation diskette into your floppy drive. After copying the
Port
PCI Slot
Windows Hardware and
Driver Installation
Screw for attaching card bracket
to PC casing
Advertisement
Table of Contents
Need help?
Do you have a question about the Parallel-PCI/LP Card and is the answer not in the manual?
Questions and answers