NETGEAR D3600? D6000 User Manual page 162

3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > ADVANCED Home.
The ADVANCED Home screen displays.
6. In the Internet Port pane, click the Show Statistics button.
The following table describes the fields and columns of the Show Statistics pop-up
screen.
Field or Column
System Up Time
Port
Status
TxPkts
RxPkts
Collisions
Tx B/S
Rx B/S
Up Time
N600 and AC750 WiFi DSL Modem Routers
Description
The time elapsed since the modem router was last restarted.
The statistics for the WAN (Internet link over Ethernet) port, LAN (Ethernet) ports,
and WLAN (WiFi) ports. For each port, the screen displays the information that is
described in this table.
The link status of the port.
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of signal collisions that occurred on the port. A collision occurs when
the port attempts to send data at the same time as the device that is connected to
the port.
The number of bytes transmitted per second on the port.
The number of bytes received per second on the port.
The time elapsed since this port acquired the link.
Manage the Modem Router and Monitor the Traffic
162