NETGEAR D3600 Quick Start

Quick Start
N600 WiFi DSL Modem Router
Model D3600
AC750 WiFi DSL Modem Router
Model D6000

Package Content

Modem router
(Model D6000 shown)
Phone cable Ethernet cable
You can connect the modem router either to an
ADSL service or to a cable or fiber modem. Choose
one connection method only. Do not use both.
Connect the Modem Router to an
ADSL Service
1. Contact your Internet service
provider (ISP).
Two types of DSL are available: ADSL and
VDSL. Contact your ISP to confirm that your
DSL service is ADSL. This product supports
only ADSL.
2. Connect the modem router to the
Internet.
Install an ADSL microfilter between the
phone line and the phone.
Use a phone cable to connect the microfilter
to the gray ADSL port on the modem router.
ADSL microfilter
For additional information about connecting
(varies by region)
to a DSL service, see the other side of this
installation guide.
3. Power on the modem router.
Connect the power adapter to the modem
router and plug it into an electrical outlet.
Wait for the startup procedure to complete
and the Power LED
4. Connect a computer.
Use an Ethernet cable to connect your
computer to any yellow LAN Etherent port
on the modem router.
You can also use WiFi to connect. To connect
Power adapter with WiFi, use the WiFi network name and
(varies by region)
password on the product label.
5. Log in to the modem router.
Launch a web browser.
The NETGEAR genie Setup Wizard
displays.
If you do not see genie, in the
address field of the web browser,
enter www.routerlogin.net.
When prompted, enter admin for
the user name and password for
the password.
ADSL Internet
Line
ADSL
Cable or fiber
microfilter
Internet
to light solid green.
Cable or fiber modem
Connect the Modem Router Wait for the startup procedure to complete
and the Power LED
to a Cable or Fiber Modem
3. Connect a computer.
1. Connect the modem router to
Use an Ethernet cable to connect your
the Internet.
computer to the yellow LAN1, LAN2, or
Use an Ethernet cable to connect
LAN3 Ethernet port on the modem router.
the cable or fiber modem to the
You can also use WiFi to connect. To connect
yellow LAN4 WAN Ethernet port
with WiFi, use the WiFi network name and
next to the gray ADSL port on the
password on the product label.
modem router. (Do not use another
LAN port for this connection.) 4. Log in to the modem router.
Launch a web browser.
2. Power on the modem router.
Connect the power adapter to the
The NETGEAR genie Setup Wizard displays.
modem router and plug it into an
a. Select the No radio button to cancel the
electrical outlet.
Setup Wizard.
Click the Next button.
b.
If you do not see genie, in the address field
of the web browser, enter
www.routerlogin.net.
When prompted, enter admin for the user
name and password for the password.
5. In genie, change the default WAN
Phone cable
to ADSL port
connection method.
a. Select BASIC > xDSL from the
Ethernet cable
NETGEAR genie menu.
to LAN4 WAN
port next to
b. From the Physical WAN Type menu,
ADSL port
select Ethernet WAN.
c. Click the Apply button.
6. In genie, start the Setup Wizard
Modem router
manually.
Select ADVANCED > Setup Wizard
a.
from the NETGEAR genie menu.
Power adapter
Click the Next button.
b.
to light solid green.