Before You Connect To The Modem Router; Wired Connection; Wifi Connection - NETGEAR D3600? D6000 User Manual

N600 and AC750 WiFi DSL Modem Routers

Before You Connect to the Modem Router

During and after installation, you can connect to the modem router's network through a wired
or WiFi connection. If you set up your computer to use a static IP address, change the
settings of your computer so that it uses Dynamic Host Configuration Protocol (DHCP).

Wired Connection

You can connect your computer to the modem router using an Ethernet cable and join the
modem router's local area network (LAN).

WiFi Connection

You can connect to the modem router's WiFi network, which is listed on the product label in
the WiFi Network Name (SSID) field. The password that you must use to connect to the WiFi
network is listed in the Network Key (Password) field.
WiFi Network Name (SSID)
Network key (password)
Figure 6. Modem router product label with WiFi network name (SSID) and password (network key)
Install and Access the Modem Router and Its Network
16