Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Digitus DA-71051
Summary of Contents for Digitus DA-71051
- Page 1 USB 2.0 External HDD Enclosure 3.5" (8,89cm) User Manual DA-71051...
-
Page 2: System Requirement
Foreword Congratulations of your purchase of our product! We will show you a new storage concept with safety and convenience, It is our pleasure to give you the best solution to expand your HDD`s Capacity and enhance your data`s reliability in PC system or Mac system. Before using the product, please read this manual carefully for further recognizing of the product. -
Page 3: Hardware Install
IV. Hardware Install Slide the button to [OPEN] position, Slide the top cover to the direction of USB socket Remove the top cover Connect the 3.5" (8,89cm) SATA HDD to the 22pin SATA connector at the rear of the HDD firmly Push the HDD into the enclosure slowly and carefully Slide the top cover to the main case Slide the button to the [CLOSE] position... -
Page 4: Driver Installation
V. Driver Installation a. Under Windows 2000/XP/Vista/7: No driver needed Under system Windows 7/XP/Vista/2000, system will automatically detect the new hardware and finish the setup! An icon will appear on the right-bottom area of the system toolbar as below: Congratulations to enjoy this product now! b. - Page 5 Click [Agree] to accept the license agreement Click [Install] enter next step...
- Page 6 Click [OK] to finish installation NOTE: The back-up software only support Windows system, not for Mac OS. B. Use back-up function After finishing installation, an icon will appear on desk-top, double click [PCCloneEX], The below window will appear:...
- Page 7 Press the backup button, program will appear [Please select file(s)], click [OK] Please select the file(s) which you want to backup in the left window, then press the button again...
- Page 8 Follow the instruction to press the button again or click [Start] System starts to backup the file(s) which you have selected, when it is finished, there will be a display [Backup finished], click [OK]...
- Page 9 6. Backup file finished now you may check the file on right window VIII. Remove the external enclosure Before removing this unit from your computer, please finish the following procedures for a safe removal: 1). Click the icon in the [Desktop] window of your computer 2).