Taking A Reading; Changing Modes - MABIS 18-102-000 Instruction Manual

1) Press and hold the POWER/SCAN button for one second,
then release. The system will perform a self-test, Fig 1.
2) After performing the self-test, the display will show the
last temperature taken, Fig. 2. The thermometer will beep
indicating that the unit is ready for measurement.
3) Straighten the ear canal to give a clear view of the
eardrum.
* For children under 1 year, pull the ear straight
back, Fig. 3.
* For ages 1 year to adult, pull the ear up and back,
Fig. 4.
NOTE: Many pediatricians recommend the use of ear ther-
mometers for children older than 6 months.
4) While pulling on the ear, insert the probe snugly into the
ear canal and press the SCAN button, Fig. 5. Release the
button.
5) If the measurement is below 100.4
mometer will beep once and the measurement will be
shown on the display with a happy face symbol, Fig. 6.
6) If the temperature is 100.4
mometer will sound one long beep followed by two short
beeps. The measurement will be shown on the display
with a sad face symbol to indicate fever, Fig. 7.
NOTE:
To ensure accuracy, please wait at least 5 seconds between successive
readings.
Temperature readings can be displayed in either Fahrenheit
or Celsius. To switch between F
POWER/SCAN button. Without releasing, also press the
MEM button and toggle between the modes, Fig. 1 and 2.

Taking a Reading

o
F (38
o o
F (38 C) or above, the ther-

Changing Modes

o o
or C, press and hold the
6
Fig. 1
Fig. 2
Fig. 3
o
C), the ther-
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 1
Fig. 2