Installation Tips; Removing And Installing Front Panel; Removing And Installing The Front Grille - Daikin CTXS07WVJU9 Installation Manual

Installation Tips

1.

Removing and installing front panel

• Removal method
1) Place your fingers in the indentations on the main unit (one each on
the left and right sides), and open the front panel until it stops.
2) While pushing the left side front panel shaft outward, push up the front
panel and remove it. (Remove the right side front panel shaft in the
same manner.)
3) After removing both front panel shafts, pull the front panel toward
yourself and remove it.
• Installation method
Align the tabs of the front panel with the grooves, and push all the way in.
Then close slowly. Push the center of the lower surface of the panel firmly
to engage the tabs.
2.

Removing and installing the front grille

• Removal method
1) Remove the front panel and air filters.
2) Remove the front grille fixing screws (2 screws). (See Fig. 1)
3) Remove the service lid screw (1 screw) and remove service lid.
(See Fig. 2)
4) In front of the
Lightly pull the front grille toward you with one hand, and push down on
the hooks with the fingers of your other hand. (See Fig. 3)
When there is insufficient work space because the unit is close to
ceiling
Place both hands under the center of the front grille, and while pushing
up, pull it toward you.
• Installation method
1) Install the front grille and firmly engage the upper hooks (3 locations).
2) Install the 2 screws of the front grille.
3) Install the service lid and screw for fixing the service lid (1 screw).
4) Install the air filters and then mount the front panel.
11
mark on the front grille, there are 3 upper hooks.
Push the
rotating shaft
of the front
panel into the
groove.
Fig. 1
Service lid
Push
down.
Fig. 2 Fig. 3
1) Push up.
2) Pull toward you.
CAUTION
• Be sure to wear
protection gloves.
Upper
hook
■
English