Limit Administrator Commands; Intrusion Commands; Multiple Ssid And Vlan Commands - D-Link DAP-3690 Reference Manual

set dhcp_staticip_set_hostname
set dhcp_staticip_set_ip
set dhcp_staticip_set_mac
set dhcp_wins

Limit Administrator Commands

Limit Administrator Commands
get ladtype
get ladvid
get ladippool
set ladtype 0
set ladvid
set ladippool

Intrusion Commands

Intrusion Commands
get intrusion
set intrusion
set rogue_set_type_mac

Multiple SSID and VLAN Commands

Multiple SSID and VLAN Commands
set multi-auth
set multi-groupvid
set multi-acctstate
set multi-acctip
set multi-acctport
set multi-acctsecret
set multi-pri-state
Set DHCP static IP's host name
Set DHCP static IP's IP
Set DHCP static IP's MAC <macaddradd
macaddress>
Set DHCP server WINS IP
Description
Limited administration type
VLAN ID which can control device
Starting IP of the limited administration IP pool
Limited Administration Type
VLAN ID which can control device
Starting IP of the limited administration IP pool
Note: The DHCP server assigns Dynamic IP
addresses to Wireless Client devices. It doesn't
assign IP to an Ethernet port.
Description
Display intrusion
Set intrusion
Set rogue AP index type and MAC < type
macaddradd macaddress>
Description
Set Authentication Type of Multi-SSID[index]
Set Group VID of Multi-SSID[index]
Set Accounting server state of Multi-SSID[index]
Set accounting server IP of Multi-SSID [index]
Set accounting server port number of Multi-SSID
[index]
Set accounting server secret (size: 1--64) of Multi-
SSID [index]
Set Multi-SSID priority state