D-Link DAP-3690 Reference Manual page 12

get zonedefence-ip
set acktimeout_a
set acktimeout_g
set ap_band
set apmode
set autorekey
set aparray-state
set arrayname
set arrayrole
set arraypassword
set array_syncnode_enable
set array_syncnode_disable
set assoclimit
set authentication
set autoChannel
set beaconinterval
set cipher
set Channeltype
set cwm
set d-wepkeylen
set d-wepkeyupdate
set defkeyindex
set dtim
set 2.4G fixedrate
set 5G fixedrate
set groupkeyupdate
set key
set keyentrymethod
set keylength
set macclonetype
set maccloneaddr
set mcastrate
set multi-d-wepkeylen
set multi-d-wepkeyupdate
set passphrase
set radiusip
set radiusport
set radiussecret
set ssid
Display Zonedefence IP table list
Set acktimeput in A band (range: 50--200)
Set acktimeput in G band (range: 64--200)
Set ap band (2.4G or 5G)
Set AP operation mode
Set autorekey enable
Set AP Array state
Set AP Array arrayname
Set AP Array role[master:1, backup master:2,
slaver:3]
Set AP Array password
Set array_syncnode enable
Set array_syncnode disable
Set Association Limit
Set authentication type
Set auto channel
Set beacon interval (range: 25--500)
Set Cipher of wep,tkip,aes, or auto
Set Channel type
Set CWM
Set 802.1X dynamic WEP Key Length
Set 802.1X dynamic WEP Rekey Interval(in Secs)
Set default key Index [1--4]
Set DTIM (1--15)
Set fixrdrate
Set fixrdrate
Set group key update interval (in secs: 0 (no
update) or 300-99999)
Set encryption key index [1--4][value]
Select Encryption Key Entry Method of key [index
1--4]
Set Encryption Key Length of key Index [1--4]
Set MAC address clone type
Set MAC clone address
Set mcast rate
Set 802.1X dynamic WEP Key Length of Multi-
SSID[index]
Set 802.1X dynamic WEP Rekey Interval(in Secs) of
Multi-SSID[index]
Modify passphrase (size: 8--63)
Set RADIUS IP address
Set RADIUS port number
Set RADIUS shared secret (size: 1--64)
Set Service Set ID