Tftp Commands; Dhcp Server Commands - D-Link DAP-3690 Reference Manual

get daylightsaving
get sntpserver
get tzonelist
set daylightsaving
set sntpserver x.x.x.x
set tzone

TFTP Commands

TFTP Commands
tftp getconfig
tftp getfirmware
tftp putconfig

DHCP Server Commands

DHCP Server Commands
get dhcp_dns
get dhcp_endip
get dhcp_gateway
get dhcp_leasetime
get dhcp_netmask
get dhcp_server
get dhcp_startip
get dhcp_sta_expire
get dhcp_sta_hostname
get dhcp_sta_mac
get dhcp_sta_ip
get dhcp_staticip_mode
get dhcp_staticip_ip
get dhcp_staticip_mac
get dhcp_staticip_hostname
get dhcp_staticip_pool_state
get dhcp_wins
set dhcp_dns
set dhcp_endip
set dhcp_gateway
set dhcp_leasetime
set dhcp_netmask
set dhcp_server
set dhcp_server_static_ip_mode
set dhcp_startip
set dhcp_staticip_set_disable
set dhcp_staticip_set_enable
Display daylight saving time
Display SNTP/NTP server IP address
Display time zone
Set daylight saving time
Set SNTP/NTP server IP address
Set time zone setting
Description
Use TFTP to get a configuration file from a PC
Use TFTP to get firmware from a PC
Use TFTP to put configuration on a PC
Description
Display DHCP server DNS IP
Display DHCP server end IP
Display DHCP server gateway IP
Display DHCP server lease time
Display DHCP server net mask
Display DHCP server states
Display DHCP server start IP
Display DHCP server STA's expire time
Display DHCP server STA's host name
Display DHCP server STA's MAC
Display DHCP server STA's IP
Display DHCP server static mode states
Display DHCP server static mode IP
Display DHCP server static mode MAC
Display DHCP server static mode host name
Display DHCP server static mode pool state
Display DHCP server WINS IP
Set DHCP server DNS IP
Set DHCP server end IP
Set DHCP server gateway IP
Set DHCP server lease time
Set DHCP server net mask
Set DHCP server state
Set dhcp server static ip mode states
Set DHCP server start IP
Set dhcp staticip disable
Set dhcp staticip enable