Error Displays - Clarion DXZ955MC Service Manual

ERROR DISPLAYS

Error Display
ERROR 2 A DISC is caught inside the CD deck and is not ejected.
ERROR 3 A DISC cannot be played due to scratches,etc.
ERROR 6 A DISC is loaded upside-down inside the CD deck and does not
play.
ERROR 7
The format of the flash memory is damaged.
ERROR 8
There is a failure with the flash memory.
ERROR 9 An error during recording, scratch on the
disc, or error due to sound skips
ERROR 2 A DISC inside the CD changer is not loaded.
ERROR 3 A DISC inside the CD changer cannot be played due to scratches,
etc.
ERROR 6 A DISC inside the CD changer cannot be played because it is
loaded upside-down.
ERROR 2 A DISC inside the DVD changer cannot be played.
ERROR 3 A DISC cannot be played due to scratches,etc.
ERROR 6 A DISC inside the DVD changer cannot be played because it is
loaded upside-down.
ERROR P Parental level error
ERROR R Region code error
If an error display other than the ones described above appears, turn off the power,
then press the [ RELEASE ] button and remove the DCP.
And press the reset button for about 2 seconds with a thin rod.
Cause
- 5 -
Measure
This is a failure of CD deck's mechanism.
Replace with a non-scratched,non-warped-disc.
Eject the disc then reload it properly.
Execute ALL ERASE on the flash memory,
and the problem is solved.
Turn POWER/ACC off and then turn it on
again, and the problem is solved.
Turn POWER/ACC off and then turn it on
again, or eject the CD. The problem is solved.
This is a failure of CD changer's mechanism.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
This is a failure of DVD mechanism.
Retry or replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
Set the correct Parental level.
Eject the disc and replace correct region code disc.
Reset button
DXZ955MC
DXZ956MC