Step 2: Setting The Time - Sony LBT-VR70 Operating Instructions Manual

Using the remote
You can control Sony TVs using the buttons
below.
TV/
VIDEO
By pressing You can
TV 1/u
Turn on or off the TV
TV/VIDEO Select the input source for the TV
TV VOL Adjust the volume of the TV
TV CH Change the channel of the TV
Note
Depending on the TV, you may not be able to
control your TV or to use some buttons above.
When carrying this system
Do the following to protect the CD
mechanism.
Make sure that all CDs are removed from the
unit.
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Hold down CD LOOP and press 1/u.
3 Disconnect the power cord.
Step 2: Setting the
time
TV 1/u
You must set the time before using the timer
TV VOL
functions.
TV CH
1
1
2
3
4
5
Tip
If you make a mistake, start over from step 1.
Note
The clock setting is canceled when you disconnect
the power cord or if a power failure occurs.
Press t/CLOCK SET.
The hour indication flashes.
Press TUNING +/– to set the hour.
Press ENTER/NEXT.
The minutes indication flashes.
Press TUNING +/– to set the
minutes.
Press ENTER/NEXT.
The clock starts.
3,5 2,4
7