Recording A Video Cd/Cd; Cd Synchro Recording - Sony LBT-VR70 Operating Instructions Manual

To Do this
Stop playback Press p.
Press ·P (or P on the remote).
Pause
Press ·P again to resume
playback (or CD ( on the
remote).
Select a track During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press + (to go forward) or
= (to go backward) on the
remote.
Press and hold ) or 0 during
Find a point
in a track playback. Press ·P to stop
(Lock Search searching at the desired point.
Function)
Select a CD Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
Play only the Press PLAY MODE repeatedly
CD you have until "1 DISC" appears.
selected
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove or Press PUSH OPEN.
change the
CDs
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• Pressing ·P while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
• You can switch from another source and begin
playing a CD just by pressing ·P, one of the
DISC 1 - DISC 5 buttons, or CD ( on the remote
(Automatic Source Selection).
• If there is no CD in the player, "NO DISC"
appears in the display.
• You can change the CD which is in the loading
position during playback of the CD which is in the
playing position.
Recording a
VIDEO CD/CD

— CD Synchro Recording

This function lets you easily record from a
CD to a tape. You can use TYPE I (normal) or
TYPE II (CrO ) tapes. The recording level is
2
automatically adjusted.
1/u
(Power) SURROUND
2,3
6
DOLBY NR
1
Press PUSH 6 and insert a blank
tape into deck B.
With the side you want to
record on facing forward
7 1
ª
p
5
4
p
continued
13