Sony LBT-VR70 Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
5
If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
VOLTAGE SELECTOR
6
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
7
Deactivate the demonstration mode
by pressing DEMO (STANDBY)
while the system is off.
To connect optional AV
components
See page 49.
6
-
Inserting two R6 (size AA)
batteries into the remote
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press DEMO
(STANDBY) while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.