Sony LBT-VR70 Operating Instructions Manual page 5

2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Extend the FM wire
antenna horizontally.
AM loop antenna
3
Connect the video input jack of your
TV to the VIDEO OUT jack of this
system using the supplied video
connecting cable.
When using a TV
Turn on the TV and select the video input to view
pictures from this system.
Tip
When your TV has an S VIDEO jack, for the best
picture quality, you can use an optional S VIDEO
cable to connect it to the S VIDEO OUT jack on the
rear panel of this system. Note that the input signal
from the VIDEO1 and VIDEO2 INPUT jacks do not
output via the S VIDEO OUT jack.
4
Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
PAL
AUTO
NTSC
If your TV automatically changes the
color system according to the input
signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Pictures recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Pictures recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Notes
• Be sure to turn off the system before changing the
SYSTEM SELECT setting.
• Even if you change the color system using the
SYSTEM SELECT, the color system of the signal
input from the VIDEO1 and VIDEO2 INPUT jacks
does not change.
SYSTEM
SELECT
continued
5