Table of Contents
Advertisement
Before You Start
IMPORTANT SAFEGUARDS
1. Be sure to connect the color coded
leads according to the diagram.
Incorrect connections may cause
the unit to malfunction or damage
,
the vehicle s electrical system.
2. Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body.
3. Make sure all the connections are
completely correct before turning
on your unit.
4. When replacing the fuse(s), the re-
placement must be of the same am-
perage as shown on the fuse holder.
5. Do not block vents or radiator pa-
nels. Blocking them will cause heat
to build up inside and may result in
fire.
6. After completing the installation and
beginning to play the unit(including
replacing the battery), please remove
the front panel at first, and then press
RESET button on the base with
pointed object (such as ball-point
pen) to set the unit to initial status.
About this manual
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MEPG-4/USB
operation that can only be operated by
the remote control, there are also
functions can be operated by the buttons
provided for the main unit.
Additional Information
Simple Troubleshooting Guide
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist
Cause/Solution
Problem
.
No power.
.
Some errors occur in
the
LCD or no function
when
pressing the button.
.
Unable to receive stations.
.
Poor effect on receiving a
station.
.
. .
CDs cannot be loaded.
Sound skips.
.
No images.
.
Images skip.
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
Due to continuous product improvement, the operations
are subject to run the model.
below
.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not
connected properly.
Improper setting of the color system. Set the color
system
to PAL or NTSC
according to the
connected television.
41
09
Advertisement
Table of Contents
