Table of Contents
Advertisement
AG-268 SIP Gateway User Manual
2.4
SIP
2.4.1
SIP server Configuration
1.
Primary Server:
2.
Secondary Server:
3.
Address:
4.
Port:
5.
Domain Name:
6.
Send Registration Request with Expire
Indicate the register period,
set this time to a lower value.
7.
Outbound Proxy IP:
8.
Outbound Proxy Port:
RTP port Number Setting:
NAT Traversal
1.
NONE:
2. UPnP:
3.
Stun Server IP:
4.
Stun Server Port:
Gateway Settings
Primary Server, AG-268 will auto switch to
Secondary server if primary server is unavailable.
secondary server (back up function)
SIP server IP address
SIP server port，the well know port is 5060
server domain
Time： Register TTL (unit: seconds).
if AG-268 always log off after some time，please
Outbound Proxy server IP address
Outbound Proxy server port
RTP local port, the minimum value is 4
disable NAT traversal
use UPnP，need the support of upper gateway
Fill in your stun server IP when using stun method
Fill in stun server port
Page 15 of 37
Advertisement
Table of Contents
Need help?
Do you have a question about the AG-268 and is the answer not in the manual?