Lan Config; Voip; Sip Config - ATCOM AG-198 User Manual

AG-188 User Manual
2.2.2 2.2.2 2.2.2 LAN 2.2.2

LAN Config

LAN LAN
IP IP IP IP , , , , Netmask Netmask Netmask: : : :
Netmask Set the IP and Netmask for the LAN
DHCP DHCP Server: DHCP DHCP Server: Server: Server: Enable DHCP service in LAN port
NAT: NAT:
NAT: NAT: Enable NAT.
Bridge Bridge Mode: Mode:
Bridge Bridge Mode: Mode: Enable this option to switch to bridge mode. Gateway won't assign IP
for its LAN port in bridge mode and its LAN and WAN port will be in the same network.
(This setting won't take effect unless you save the config and reboot the device)
2.3 2.3

2.3 VoIP

2.3 VoIP VoIP VoIP
2.4.1 2.4.1 2.4.1 SIP 2.4.1 SIP

SIP Config

SIP Config Config Config
� � � �
SIP Line SIP SIP SIP Line Line Line Select: Select: Select: Select:
AG-198 support 2 sip line. You can select SIP1 or SIP2 in the drop down box, and press
Load to switch.
� � � � Basic Setting:
Basic Basic Basic Setting: Setting: Setting:
� Register Status: Shows wether the sip account registered successfully
�
Server Name: Keep it as blank if no specific
Config Config Config
10 / 40