Q7 How To Configure Ag-268; Q8 How To Change Ag-268 Lan Port Mac Address - ATCOM AG-268 User Manual

one answers the call in the timeout.
Call Forwarding: (forwarding always)
a) Enable call forwarding: pick up the handset press
will hear the dial tone press the forwarding number then you will here
three beeps indicating setting finish, then all incoming call will forward to
this number automatically。
b) Disable call forwarding: pick up the handset
will here three beeps indicating setting finish
Do not disturb: (DND)
a) Enable DND:
three beeps indicating setting finish then the phone won't ringing when
there is an incoming call。
b) Disable DND:
three beeps indicating setting finish
Call transfer:
a) Unattended transfer:
number then B will hear three beeps indicating the transfer
successfully。
b) Attended transfer： A calls B B push the
dial C number
call then A can talk with C。
Call Return:
Pick up the handset
3 way conference call:
A calls and talks with B
number to talk with C
way conference call
Q7 How to configure AG-268?
A7 please refer to "AG-268 quick start guide"
Q8 How to change AG-268 LAN port MAC address?
A8 please access
AG-468 SIP 协议网关使用手册
pick up the handset
pick up the handset
A call B B press
to talk with C
and then press
B push the
B then push the
C will leave the call is B push the
http://AG-268ip/burn.htm
press
press *74#
press #74#
*98# and then
hook flash
then B press *98#
*69# to dial the latest received call
hook flash to hold A B then
hook flash again to enable three
hook-flash
and change the MAC address,
*72# then you
#72# then you
then you will here
then you will here
enter C
to hold A B then
to transfer the
dial C
again.
37