Advertisement
3
When the driver installation is completed, configure the driver
in
Printers and Faxes.
Right click on Rolly 1000 and select
down menu.
Click on
Advanced
tab.
Click
Printing Defaults
DeFAULt PRINtING SettINGS
In
Options
tab set the
field values as follows:
Paper format
mm
landscape
rotate 180°
Settings
No. Of Copies: 1
Speed: 50 mm/s
Darkness: 12
Stocks: User defined
For ttL labels and ttF
continuous film only
set
Darkness: 9
The darkness value is indicative and modifiable based on
print quality and material used.
Click
Advanced Setup
tab.
Set the field values according
to the printing media (tags, labels, etc.).
TPM-ROLL
Vertical
Sensor type:
Options
Tear off, Feed Offset: 15mm
:
KM-ROLL
Sensor
:
Black mark
type
Tear off, Feed Offset: 0mm
Options
:
Properties
from the drop
TTL
Sensor
:
Vertical
type
Options
Tear off, Feed Offset: 0mm
:
TTF and STRIP-ROLL
Sensor
:
Continuous
type
Tear off, Feed Offset: 0mm
Options
:
FoR KM-RoLL oNLY
Click
Other
Tick
Use printer settings
Click
Close
Click
OK
on all open windows to confirm the new settings and
return to
Printers and
Faxes.
Right click on printer Rolly 1000 and choose
ces
from the drop down menu.
Repeat the same
configurations of the
DeFAULt
PRINTING
SETTINGS
in
Printing
Preferences.
Click
OK
to confirm
the new settings and
return to
Printers and
Faxes.
WARNING: by connecting the printer to a different USB port,
the operating system detects new hardware.
Installation wizard starts again and steps
repeated.
We recommend always connecting the printer to the same
USB port.
4
Printing Preferen-
and
must be
Advertisement
