Winding A Bobbin - ELNA eXperience 660 Instruction Manual

w
q
A
B
w e
q
q
e
r

Winding a Bobbin

To remove bobbin, slide bobbin cover plate release
button q to the right and lift away the bobbin cover plate
w.
Lift out the bobbin e.
Turn ON the power switch.
q Lift up the spool pin. Place the spool of thread on the
spool pin with the thread coming off the spool as
shown. Attach the spool holder and press it firmly
against the spool of thread.
NOTE: Spool holder needs to be changed according to
the type of thread spool
A. Large spool
B. Small spool
w Pull the thread towards the thread guides, under the
hook and wrap it around the guide as shown.
e Pull the thread back around the bobbin winder thread
guide.
r Pass the thread through the hole in the bobbin from
inside to the outside. Place the bobbin on the bobbin
winder spindle.
22