Main Function Of Keys - ELNA eXperience 660 Instruction Manual

START
STOP

Main Function of Keys

1. START/STOP Key
NOTE: The foot control must be detached to use this
2. Reverse Key
4
3
3. Auto-Lock Key
2
1
4. Up/Down Needle Key
NOTE: The needle will always stop in the up position
10
Press this key to start the machine. The first few
stitches will be sewn at a slow speed and then
machine sews at the speed set by the speed control
lever. Press key again to stop machine. Press and
continue to hold key to sew at slow speed, release
key to sew at set speed. Press key again to stop.
key.
If you are sewing 1 (straight stitch), 2 (zigzag stitch)
or 3 (3-step zigzag stitch), press and hold this key.
The machine will sew in reverse until you release the
key with or without using the foot control or START/
STOP key.
* If you are sewing any other stitches, utility or
decorative, the machine will immediately stop and
sew a lockstitch when you press this key.
Press this key while sewing 1 (straight stitch), 2
(zigzag stitch) or 3 (3-step zigzag stitch) and the
machine will sew a few stitches in place and stop
automatically.
* Press this key while sewing utility or decorative
stitches and the machine will complete the stitch,
lockstitch and stop.
If the needle is up when you press this key, the
needle will go down to its lowest position. The needle
will continue to stop in the down position.
If the needle is down when you press this key, the
needle will go to its highest position. The needle will
continue to stop in the up position.
after sewing buttonholes.