ELNA eXperience 660 Instruction Manual page 14

7. Select Mode Key
When you switch on the machine, the Direct Select Mode is active. You
can select the first ten stitches (illustrated on the keyboard) with a
single touch of the key.
Touch the "MODE" key to activate the 3 Digit Mode. You can select all
stitches by entering the 3 digits for the desired stitch.
Touch "MODE" key again to reactivate the Direct Select Mode.
8. Memory Save/Recall Key
The 3 Digit Mode has three separate memories for saving a sequence
of stitches. Press this key to activate memory 1 (M1). Press key again
to activate M2. Once a memory is activated, press the "ENTER" key to
save the sequence.
To recall a saved memory, press "M" key until desired memory appears.
To activate the saved sequence, press "Mirror Image" key.
9. Enter Key
Press this key after selecting a stitch in the 3 Digit Mode and that stitch
will be memorized. Up to 50 stitches can be combined.
These stitches cannot be memorized into a sequence: 009 - 023 and
030.
10. Mirror Image Key
When this key is pressed after selecting a stitch in the 3 Digit Mode, the
stitch will be flipped horizontally (as it appears on the stitch chart).
If you are in a permanent memory (M1, M2, or M3), press this key to
recall the saved sequence.
11. My Personal Setting Key
Select a stitch in Direct Select Mode and override the factory settings
by changing width/needle position or length. Press this key after
changing settings. Press "ENTER" key. New settings will now be saved
as the default settings with PS symbol in LCD screen.
12. Clear Key
When this key is pressed, the last memorized stitch or the stitch that is
above the cursor will be cleared. Press and hold the "C" key; the entire
sequence is cleared. If this key is pressed and held after sewing a
sequence, the sequence will be deleted.
13. Review Memory Left Key
Use this key to review stitches in a memorized sequence when all
stitches do not appear on the screen.
OR
Press this key to move the cursor left until it is under the stitch that will
be edited.
14. Review Memory Right Key
Use this key to review stitches in a memorized sequence when all
stitches do not appear on the screen.
OR
Press this key to move the cursor right until it is under the stitch that will
be edited.
12