Record Settings; Instant Record; All-Day Record - HIKVISION DS-7104NI-SL Quick Operation Manual

Quick Operation Guide of DS-7100NI-SL Series NVR
basic setting of the IP cameras.
Steps:
1. Click the icon in the camera management interface to edit the parameters; you can edit the IP address,
protocol and other parameters.
2. Click OK to save the settings and exit the editing interface.

Record Settings

Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to
the user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.
And for other record types, you may refer to the user manual for detailed information.
Note: After rebooting all the manual records enabled are canceled.

Instant Record

On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the
window when you click on it.
Click the icon to enable the record, and the icon turns to
then the icon turns to .

All-day Record

Perform the following steps to set the all-day recording.
On the live view window, right-click the window and move the cursor to the Start Recording option, and select
Continuous Record or Motion Detection Record on your demand.
. And click
14
icon to disable the record,