Replacing Power Cord - Nespresso EF 451 C 111 Service Manual

8.5.4 Replacing power cord

• Disconnect 2 insulated faston receptacles (55).
• If present, disconnect ground wire (15, part of thermoblock assembly).
• Unlatch cable bracket (56) with screwdriver.
15
56
Citiz service manual
R E P A I R S
55
Use a pair of flat pli-
ers to pull off insulat-
ing sleeve with recep-
tacle.
The counterpart, a
flat receptacle, has a
special connector
latching (see detail). Press
down lever at first, then p ull
off receptacle.
The cable bracket is
under tension. There-
fore, hold the cable
bracket with your finger
when unlatching it.
65