Original/Copy Paper-Related Items - Toshiba e-studio 167 Operator's Manual For Copying Functions

6 TROUBLESHOOTING

Original/Copy paper-related items

Phenomenon
An original jams.
Copy paper jams.
Multiple feeding occurs.
192 Before Calling Service Technician
Usual cause
An original not acceptable for
the equipment is being used.
Copy paper not acceptable
for the equipment is being
used.
The size of the copy paper in
the drawer or on the bypass
tray is not registered prop-
erly in the equipment.
Jammed paper is located in
a place you cannot see eas-
ily.
There is no gap between the
side guides and paper in the
drawer. Or the gap is too
wide.
Paper is clinging to each
other.
Countermeasure
Check if the original is acceptable for the
equipment.
P.55 "Precautions for Reversing Auto-
matic Document Feeder (optional) / Auto-
matic Document Feeder (optional)"
Check if the copy paper is acceptable for
the equipment.
P.39 "Paper types not acceptable"
Register the size of the placed copy paper
properly.
P.48 "Preparation 3 - Registering Size
of Paper Placed"
P.62 "Bypass copying"
See the message on the display to
recheck the position where the paper jam
has occurred.
P.172 "Paper Jams"
Adjust the gap between the side guides
and the paper properly.
P.40 "Placing paper in drawers"
Fan the paper well and place it again.