Changing The Ip Address - Buffalo LinkStation LS210D0101 User Manual

1
Click the icon in the Dock. NAS Navigator2 will launch.
2
Double-click the LinkStation icon or click the LinkStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.
3
Select the shared folder to mount and click OK.
4
The shared folder is now mounted as a network drive.

Changing the IP Address

1
Click the icon in the Dock. NAS Navigator2 will start.
2
Hold down the control key, select your LinkStation, and choose Configure... - IP Address.
3
Uncheck "Use DHCP", enter the IP address and subnet mask, and click OK.
91