Checking Drives - Buffalo LinkStation LS210D0101 User Manual

Procedure on Computers
1
In Advanced Settings, click Drives.
2
Click the icon to the right of "USB Drives".
3
Select the drive to dismount and click Dismount Disk. The "Confirm Operation" screen will open. Enter the displayed
number and click OK.
4
When the following message is displayed, it is safe to unplug the drive.
Note: To remount the drive, unplug it and then plug it back again.

Checking Drives

A disk check tests the data on a drive in the LinkStation or connected via USB for integrity. Errors are fixed automatically.
With large drives, a disk check may run for many hours. Shared folders cannot be accessed during a disk check. Do not
turn off the LinkStation until the disk check is finished. Use the procedure below to run a disk check.
1
In Advanced Settings, click Drives.
2
Select Drives to check an internal drive or USB Drives to check an external drive.
3
Select the drive to test and click Check Disk.
48