Table of Contents
Advertisement
Chapter 1 Installation
Diagrams
LS210D
1
Power LED
The white power LED will light up while the LinkStation is on.
The white power LED blinks while booting or shutting down.
The red power LED blinks when an error occurs.
If there is a status message, the power LED glows amber.
If there is a new firmware available, the power LED blinks amber.
2
Function LED
This LED glows while the LinkStation is being initialized and while dismounting USB devices.
3
Function Button
Use this button for Direct Copy, dismounting USB devices, and initializing settings.
4
Power Switch
Move the switch up and down to power on and off.
5
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, USB UPS connection, and USB printers can
be connected. USB hubs are not supported.
6
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
7
Link and Activity LED
7
Hide quick links:
Advertisement
Table of Contents
